基于氮化鋁的雙波段可調DFB激光器的設計
發布時間：2018-12-16 20:06
【摘要】：隨著通信技術的不斷發展尤其是光通信技術的發展,人們對帶寬的要求也日益提高,大容量、高速率以及高頻譜效率的光通信網絡逐漸成為下一代通信網絡的主流。波長可調諧激光器在簡化DWDM(密集波分復用)系統光源配置的同時也大幅度提升了光通信系統的性價比。目前,波長可調DFB-LD(分布反饋激光器)已成為光通信系統至關重要的一部分。另外,隨著MEMS(微機電系統)技術的發展,可調諧的GaN(氮化鎵)激光器及濾波器已有報道,但是基于AlN(氮化鋁)材料集成制備波長可調諧DFB-LD的研究較少。本文依據嚴格耦合波理論和介質平板波導理論,基于MEMS(微機電系統)技術,利用周期可調諧的布拉格光柵設計了一種AlN(氮化鋁)波長可調DFB-LD(分布反饋激光器)。采用梳齒狀驅動器驅動光柵動態調節,通過數值計算并且利用有限元軟件COMSOL建立了基于ALN的可調DFB-LD二維模型,對其在1310 nm波段進行模擬仿真。分析了激光器電場模式在不同光柵結構參數下的輸出特性,確定了DFB-LD的光柵結構參數。分析表明,激光器輸出波長與光柵周期呈線性關系,且一個光柵周期對應多個不同的光柵高度值。在小于模式截止光柵高度情況下呈20 nm周期性分布。并依據光柵周期和激射波長的關系,提出了制作1290~1330 nm及1530~1565 nm波段可調激光器的可能性,為實現波長可調諧DFB-LD的制造提供了理論基礎及數據參考。
[Abstract]:With the continuous development of communication technology, especially the development of optical communication technology, the demand for bandwidth is also increasing. Optical communication networks with large capacity, high rate and high spectral efficiency have gradually become the mainstream of the next generation communication networks. Wavelength tunable laser not only simplifies the configuration of DWDM (dense wavelength Division Multiplexing) system light source, but also greatly improves the performance and price ratio of optical communication system. At present, wavelength tunable DFB-LD (distributed feedback laser) has become an important part of optical communication system. In addition, with the development of MEMS (Micro-Electro-Mechanical system) technology, tunable GaN lasers and filters have been reported, but there are few researches on wavelength tunable DFB-LD based on AlN (aluminum nitride) material integration. Based on the strictly coupled wave theory and dielectric planar waveguide theory, based on MEMS (Micro-Electromechanical system) technology, a kind of AlN (distributed feedback laser) with tunable AlN wavelength is designed by using periodically tunable Bragg gratings. The adjustable DFB-LD two-dimensional model based on ALN is established by numerical calculation and finite element software COMSOL, which is driven by comb driver. It is simulated in 1310 nm band. The output characteristics of laser electric field mode under different grating structure parameters are analyzed and the grating structure parameters of DFB-LD are determined. The analysis shows that the output wavelength of the laser is linearly related to the grating period, and one grating period corresponds to many different grating height values. Under the condition of less than the height of the mode cut off grating, the periodic distribution of the grating is 20 nm. According to the relationship between the grating period and the emission wavelength, the possibility of fabricating 1290 nm and 1530U 1565 nm tunable lasers is put forward, which provides a theoretical basis and data reference for the fabrication of wavelength tunable DFB-LD.
【學位授予單位】：南京郵電大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TN248
本文編號：2382978
[Abstract]:With the continuous development of communication technology, especially the development of optical communication technology, the demand for bandwidth is also increasing. Optical communication networks with large capacity, high rate and high spectral efficiency have gradually become the mainstream of the next generation communication networks. Wavelength tunable laser not only simplifies the configuration of DWDM (dense wavelength Division Multiplexing) system light source, but also greatly improves the performance and price ratio of optical communication system. At present, wavelength tunable DFB-LD (distributed feedback laser) has become an important part of optical communication system. In addition, with the development of MEMS (Micro-Electro-Mechanical system) technology, tunable GaN lasers and filters have been reported, but there are few researches on wavelength tunable DFB-LD based on AlN (aluminum nitride) material integration. Based on the strictly coupled wave theory and dielectric planar waveguide theory, based on MEMS (Micro-Electromechanical system) technology, a kind of AlN (distributed feedback laser) with tunable AlN wavelength is designed by using periodically tunable Bragg gratings. The adjustable DFB-LD two-dimensional model based on ALN is established by numerical calculation and finite element software COMSOL, which is driven by comb driver. It is simulated in 1310 nm band. The output characteristics of laser electric field mode under different grating structure parameters are analyzed and the grating structure parameters of DFB-LD are determined. The analysis shows that the output wavelength of the laser is linearly related to the grating period, and one grating period corresponds to many different grating height values. Under the condition of less than the height of the mode cut off grating, the periodic distribution of the grating is 20 nm. According to the relationship between the grating period and the emission wavelength, the possibility of fabricating 1290 nm and 1530U 1565 nm tunable lasers is put forward, which provides a theoretical basis and data reference for the fabrication of wavelength tunable DFB-LD.
【學位授予單位】：南京郵電大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TN248
【參考文獻】
相關期刊論文 前6條
1 王立軍;寧永強;秦莉;佟存柱;陳泳屹;;大功率半導體激光器研究進展[J];發光學報;2015年01期
2 李欣;施政;賀樹敏;高緒敏;張苗;王永進;;微機電可調硅基三族氮化物光柵[J];光學精密工程;2014年11期
3 劉文;王質武;楊清斗;劉毅;衛靜婷;唐偉群;;氮化鋁薄膜的光學性質(英文)[J];硅酸鹽學報;2007年05期
4 王忠良,劉橋;襯底溫度對反應磁控濺射制備AlN壓電薄膜的影響[J];電子元件與材料;2005年07期
5 張海坡,阮建明;電子封裝材料及其技術發展?fàn)顩r[J];粉末冶金材料科學與工程;2003年03期
6 黃繼頗,王連衛,高劍俠,沈勤我,林成魯;超高真空電子束蒸發合成晶態AlN薄膜的研究[J];功能材料與器件學報;1998年04期
，本文編號：2382978
本文鏈接：http://m.lk138.cn/kejilunwen/dianzigongchenglunwen/2382978.html
最近更新
教材專著
