【摘要】：為了解決水平井、大位移井等復雜井鉆進過程中出現的大摩阻、鉆壓拖拽等問題,設計了一種新型水力振蕩器。根據水力振蕩器的內部結構和工作特性,結合流體力學原理,對水力振蕩器過流面積、壓降、總軸向力關鍵力學參數的變化規律進行理論分析。選取某一規格水力振蕩器的不同靜閥孔徑進行算例分析,結果表明在水力振蕩器輸入流量和入口壓力一定時,靜閥孔徑大小與過流面積呈正比,與壓降、總的軸向力呈反比;此外,通過改變流量至25L/s,進一步分析水力振蕩器關鍵參數的變化規律。研究結論可為水力振蕩器軸向振動分析提供理論支撐,為實現水力振蕩器減摩降阻的功能提供技術指導。
[Abstract]:A new type of hydraulic oscillator is designed to solve the problems of large friction and drag of drilling pressure in complex wells such as horizontal wells and extended reach wells. According to the internal structure and working characteristics of the hydraulic oscillator and the principle of hydrodynamics, the variation law of the key mechanical parameters of the hydraulic oscillator such as the overcurrent area, the pressure drop and the total axial force is analyzed theoretically. The results show that when the input flow rate and inlet pressure of the hydraulic oscillator are constant, the diameter of the static valve is proportional to the overflowing area, inversely proportional to the pressure drop, and the total axial force is inversely proportional to the pressure drop. In addition, by changing the flow rate to 25 L / s, the variation of key parameters of the hydraulic oscillator is further analyzed. The conclusion can provide theoretical support for the analysis of the axial vibration of the hydraulic oscillator and provide technical guidance for the realization of the function of reducing friction and resistance of the hydraulic oscillator.
【作者單位】： 中石化石油工程機械有限公司研究院;中石化石油機械裝備重點實驗室;西南石油大學機電工程學院;
【基金】：基金項目:中石化集團公司先導科技項目—水力振蕩器工具先導性試驗(JPJ11003)
【分類號】：TE927

【相似文獻】

相關期刊論文 前3條

1 王新峰;楊賀來;;基于最大過流面積比率的石油割縫篩管優化設計[J];機械工程師;2006年06期

2 何懷玉;;固井機內閥的設計探析[J];裝備制造技術;2010年06期

3 ;[J];;年期

，

本文編號：2296093